cuttolengthnotes
This is an old revision of the document!
Table of Contents
Cut to length notes
keyence
v_kv_pro_ch03_5.pdf
page 14 mentions changing counter to 24 bit with memsw instruction for kv high speed count for encoder input set to 5 VDC with switch on side
count numbers
from test done with KV16DR and freq drive 2-24-11
1010 counts per rev of motor test of gearbox gave 50939
51532 50881 50554
1024*50 Ans = 51200 Ans/4 Ans = 12800 51200/2 Ans = 25600 50*1010 Ans = 5050
basic_course_24.pdf
hmi
wants password when uploading program to computer password is stored in application on computer (not HMI)
cuttolengthnotes.1298646937.txt.gz · Last modified: 2011/02/25 09:15 by rfile